There are three main failures with USB Flash Drives…

1. Broken or bad USB connector/interface

We can manually solder the data leads from a USB cable or connector to flash drive’s PCB, even in cases where pads are lifted or missing (see photos below).

2. Bad fuse or other chip on PCB

We can often locate the bad component and replace or bypass it so we can image the drive.

3. Failed/corrupt controller

We can remove the flash chips and perform chip-off data recovery by reading the chips and reconstructing the controller’s algorithms (see photos below).

We use the best-in-class tools for Chip-off data recovery

This includes Ace Laboratory’s PC3000-Flash, Rusolut’s VNR, and Flash Extractor.

We have successfully recovered data from practically all RAID types, including:

  • Bricked Drive
  • Dead Drive
  • Firmware Corruption
  • Partition Corruption
  • Logical Failure
  • Drive Has Wrong Size / Incorrect Size (i.e. 8MB or Empty)
  • Drive Has Wrong Model Number In BIOS
  • Broken or Bent USB Interface / Connector

We’re Here To Help

Businesses today cross borders and regions, so you need

Get help here